I/O DALI/DSI Master Module

The WAGO-I/O-SYSTEM 750 has been expanded by a master for the lighting control DALI, Digital Addressable Lighting Interface. Pre-fabricated software modules provide for easy programming and configuration. Amongst professionals, the DALI protocol is handled as the replacement for the 1 V - 10 V interface. WAGO has taken up this trend and offers their customers hard and software components for integrating the DALI system into the building management.
The new DALI Master for the WAGO-I/O-SYSTEM 750 is a 12 mm wide I/O module that fits all controllers of the 750 series, i.e. for Ethernet, LonWORKS? and other fieldbus systems. DALI/DSI master for 64 slaves. The slaves, which are usually electronic ballasts as DALI was developed for lighting systems. Any combinations of DALI controls with other groups are possible with the WAGO-I/O-SYSTEM 750.

Additional interfaces, such EnOcean switches, using the wire-less, battery-less radio technology of EnOcean, provide for a wide-ranging selection of providers. The planner has a free selection.

The software WAGO-I/O-PRO 32 is used to program the fieldbus nodes. WAGO supports an easy creation of the application, by offering pre-programmed function blocks for DALI and other lighting applications, as well as for HVAC and blind control.

The configuration and visualization of the application can be carried out using Wizcon from the product family Axeda Supervisor. This SCADA software created by eMation, already contains various function objects for building automation. For WAGO-I/O-PRO function blocks, Wizcon offers suitable animated objects aiding the user in the parameter setting and operation. The communication between WAGO-I/O-SYSTEM 750 and Wizcon is performed via an OPC server, the standardized interface to the most common bus systems. The communication between the WAGO I/O SYSTEM 750 and Wizcon is carried out using the OPC Server that is the standardized interface to common Bussystems.

Item No. 750-641

Technical Data:

DALI specification DIN IEC 60929 (VDE 0712 Teil 23) 

  DSI specification TRIDONIC ATCO SPECIFICATION 2.0 

  Number of slaves (DALI) 64 

  Number of slaves (DSI) 100 

  Max. current output (DALI/DSI) 200 mA

  Voltage supply (DALI/DSI) 18 V VIA DC/DC CONVERTER 288-895 

  Transmission channel 1 

  CURRENT CONSUMPTION (INTERNAL) mA 30 mA

  Voltage supply via internal system supply 

  Isolation 1500 V DC DALI-BUS/K-BUS 

  Internal data width 1 BYTE CONTROL/STATUS, 5 BYTE DATA 

  Operating temperature 0 °C ... + 55 °C 

  Storage temperature -25 °C ... +85 °C 

  Relative air humidity 95 %

  Vibration resistance acc. IEC 60068-2-6  

  Shock resistance acc. IEC 60068-2-27 

  Degree of protection IP 20 

  EMC immunity to interference acc. EN 50082-2 (96) 

  EMC emission of interference per EN 50081-1 (93) 

  Conformity marking CE 

  Cross section [mm2] 0.08 - 2.5 mm2

  Cross section [AWG] 28 - 14 AWG

  Connection method CAGE CLAMP? CONNECTION 

  Weight 52.2 g

  Color light gray 

  Height 64 mm

  Height 2.52 in

  Width 12 mm

  Width 0.472 in

  Depth 100 mm

  Depth 3.937 in

  Strip length from 8 mm

  Strip length to 9 mm

  Strip length 0.33 in